Zurück

Nachricht

Three Tips for Making Solar Water Pumps Work Better

Datum

Kategorie

Wissen

Drei Tipps für eine bessere Leistung von Solarwasserpumpen

1) Initialize the solar water pump

Any type of water pump, whether it is an ordinary water pump or a solar water pump, cannot pump water smoothly if there is air in the pump. In order to better initialize the solar water pump, the water pump can be completely immersed in the water to let the air inside out. This step will not take much time, but this step is very important. If you don't have a water pump, you need to drain the water in the pump and the water pipe. When you use it again, you also need to initialize the water pump.

2) Place the solar panel in a sunny place

Nutzen Sie Solarenergie als Energiequelle, was Ihnen mehr Flexibilität bei der Wahl des Installationsortes bietet. Wählen Sie jedoch einen sonnigen Standort, damit Ihre Pumpe optimal arbeiten kann. Je länger die Sonneneinstrahlung am Installationsort, desto länger funktioniert Ihr Pumpensystem. Bei unzureichender Sonneneinstrahlung können Sie auch das Batterieantriebssystem nutzen.

3) Halten Sie das Poolwasser klar und frei von Verunreinigungen

Most solar water pumps have filters. This is to prevent impurities from clogging the pump. But it is also necessary to keep the pool water as clean as possible with less impurities. Therefore, the cleaner the water, the higher the working efficiency of the solar water pump system and the longer the Service life.

Weitere Newscases

direkt zu

WhatsApp

WeChat

Nr. 368 Yusheng Rd, Stadt Jiulong, Bezirk Hailing, Stadt Taizhou,
Provinz Jiangsu, China

Tel:+(86) 187-0218-1182