Essential Info for the Water Pump for Solar
Power
3000W
/ 4.02Hp
Power Type
AC/DC
Impeller Material
Plastic
Pump Body
stainless steel 304
Max Head
320m
Outlet Size
2 inches
Impeller Type
Centrifugal
Max Flow
3.9m³/h
Pump Length
N/A
Controller
External
DC Voltage Range
300-380V
AC Voltage Range
300-380V
Certificates
CE,TUV, SUD, UL, ISO9001,
ISO14001
Solar Water Pump Motor Details
Power:
Material:
Type:
Feature:
Bearing:
Current:
Submersion:
Water Temp:
Efficiency:
3000W
AISI 304
BLDC motor
Encapsulated water filled
Thrust bearing system
Max. DC 15A
Max. 150m
Max. 40°C
Max. 85%
Insulation Class:
Max Voltage:
Optimal Voltage:
Max Speed (Plastic):
Max Speed (SS304):
Max Speed (Helical):
Enclosure Class:
Required Cooling Flow:
F
DC Max. VOC 100V
DC Best. Vmp 40-90V
4500 RPM
4000 RPM
4000 RPM
IPX8
0.5L/s
Solar Water Pump Controller Details
Type:
Function:
Voltage:
MPPT Efficiency:
Enclosure Class:
External
Voltage/current/power display
40-90Vmp/100Voc
Max.98%
IP65
PROTECTION TYPE
Dry-Run:
Reverse:
Phase Loss:
Over-Voltage:
Low-Voltage:
Over-Current:
Over-Load:
Over-Power:
Over-Temperature:
Stall:
Error Display:
STATUS
On
On
On
On
On
On
On
On
On
On
On
Flow Rate Diagram for Solar Energy Water Pump
Solar Water Pump Daily Flow Rate Analysis
What’s Included in the Solar-Powered Water Well Pump Kit
• 1* 3inch DC solar centrifugal pump with 1* 1.5m cable
• 1* Pump controller with MPPT function
• 1* Electric float switch for water tank
• 1* Waterproof adhesive tape
• 1* PVC electrical adhesive tape
• 1* PTFE tape
Not Included (Self-Prepare)
• Suitable solar panels. Check on Instructions.
• A stainless steel wire (safety cable) to hold pump in bore.
• Poly pipe from pump to water tank.
• Pump outlet joint connector
• Wire power cable (2 wires plus earth).
Specifications (Solar Pump + Controller)
Gross Weight
10.5 KG
Net Weight
8.5 KG
Dimension
61*36*16 MM
Length
/
Solar Powered Water System Reference
Solar Product Advantages:
/ Stainless Steel-AISI 304 (316 Optional)
/ BLDC High Efficiency Motor
/ External Controller
/ Powered by DC Power Only
/ Voltage/Current/Power/Speed Display
/ Encapsulated water filled motor(No pollution risk)
/ Soft start running makes system's life longer
/ Thrust bearing system
/ Positive and negative pole reverse connection alarm
/ Over-load/Over-current/Over-voltage/Low-voltage protection
/ Dry protection(No additional float sensor required)
/ A wide range of accessories
Solar Pump End:
Stainless steel: AISI 304 (316 optional)
Non-return valve
Recommend Max Input
Standards:
Note:
* Recommend using 550W solar panels in series
* The Controller is IP 65 Rated however it is recommended that it is not mounted in direct sunlight
* VOC (V) Volts open circuit nothing connected; Vmp (V) Volts maximum power point under load
* Exceeding limits may cause serious harm or irreparable damage
Controller Data:
Controller Type:
External
MPPT Efficiency: Max.98%
Enclosure Class: IP65
Over-Load Protection: Active
Losing-Phase Protection: Active
Over Current Protection: Active
System Overview:
Head:
Max.
320m
Flow:
Max.
3.9m³/h
Recommend Max Input: Max. 0.6kW
Minimum Well Diameter: Min 3inch
Pump Discharge: Rp 1.25
Efficient Max: 98%
Motor Data:
System: Thrust bearing
Efficiency: Max.98%
Enclosure class: IPX8
Insulation class: F
WaterTemp: Max.40℃
Submersion: Max.150m
